Aurora 9×18 mk2 Kit and PCB
The kit includes everything you need to build Aurora 9×18 mk2, plus mounting screws & nuts. Those screws can also help you when you solder in the LEDs, by giving the PCB a lift off the working surface.
The smallest SMD parts are 0603 size, which is quite tiny. Naturally it’s very easy to lose them while assembling. Since it’s not much fun having to buy those little parts because you lose them, I’m including a few extras for all 0603 size parts. There are a few extra LEDs included as well. Hopefully you won’t have to stop the assembly because you’ve lost a few parts.
IMPORTANT: You need a compatible PIC programmer such as PICkit 3, ICD2/3, etc. to program the PIC. (PICkit 2 does not support the newer PICs used on those Auroras.) If you don’t have access to program the PIC, you can choose “programmed” option for additional $5. The PIC IC will be soldered to the PCB in order to be programmed.
|Aurora 9X18 mk2 kit: $179 (+$5 for PIC preprogrammed) (soldering required)||*OUT OF STOCK*|
|Aurora 9X18 mk2 PCB only: $29||*OUT OF STOCK*|
|Aurora 9X18 mk2 Fully Assembled: $329
- Assembled and tested. Comes with a USB power cord to connect to a USB port.
|*OUT OF STOCK*|
|USB Power Cord: $5.00|
|Audio Interface Kit for Aurora (SMD version) (soldering required): $25.00|
|Audio Interface Kit for Aurora (through-hole version) (soldering required): $25.00